What is an Ignition Timing & Idling Checks service?
Lube Stop’s Ignition Timing & Idling Checks service is the inspection of the ignition system. This inspection of the ignition system is from the engine combustion chambers all the way to the ignition switch. The major components of the ignition system included in the inspection are the ignition switch, ignition coil, capacitor, contact breaker, distributor, and the combustion chambers. If any component of your vehicle’s ignition system has damage or heavy contamination, you should have it fixed or replaced to avoid critical damage to the vehicle’s engine. An ignition system inspection is required to control your vehicle’s internal emissions and to make sure your vehicle will pass an emissions test.
Lube Stop provides this service as needed. To determine if it is needed, we look for signs that the ignition system is having issues. So, a visual inspection to detect pollutants or damage inside the ignition system is done. Following that, Lube Stop also inspects for grinding or clicking noise from the ignition system, steam or odd odour from your ignition coil, and decreased fuel efficiency. If they are present, we recommend replacing or fixing the ignition system components. If the customer agrees, then we proceed with the Ignition Timing & Idling Checks service.
So, always bring any indicators of trouble to the attention of our Lube Stop technicians. These include signs of strange steam or leakage from the ignition system, grinding and clicking noise, and a decrease in fuel efficiency. From there, we will trouble shoot and determine if you need to replace or fix your ignition system.
We do all this so you can enjoy the benefits of reliable engine performance and reduced internal emissions.
What is Ignition Timing for?
The main purpose of a vehicle’s ignition timing system is to advance or delay the timing of the spark so the fuel does not completely burn the instant the spark fires. This highly affects engine performance and fuel efficiency. Depending on the make and model of your vehicle, the layout of your vehicle ignition system may vary. Setting the correct ignition timing is crucial in the performance of an engine and an exhaust system. If the ignition timing is not set correctly, it allows the sparks to occur too soon or too late in the engine cycle which are often responsible for excessive vibrations and even engine damage.
The ignition timing affects many variables including engine service life, fuel efficiency, and engine performance. The ‘best’ timing is also affected by many variables. Modern engines, that are controlled in real-time by an engine control unit, use a computer to control the timing throughout the engine’s load range. Older engines that use mechanical distributors rely on inertia and manifold vacuum in order to set the ignition timing throughout the engine’s load range. Having an ignition system that is in good working condition allows your vehicle’s engine to perform better and longer, which means more power and longer service life of your engine.
Discover More about similar Quick Lube Shop Auto services
For your convenience, we provide online access to other similar services in 4 different locations on this site. The first location is a grid below containing similar services to the one you are viewing. The grid includes titles and pictures. Just click the title or picture of the service you wish to discover more about. That will link you to that service page. Additionally, we have provided flip tabs located on either side of the page you are presently viewing. Click either of these flip-forward or flip-backward tabs, to also see similar service pages.
To assist even further, we have listed similar services in the menu drop downs at the top of each page. And finally, we have included a search bar in the menu at the top of the page to assist you in finding similar services by keyword. Please use any of these 4 methods to help locate what you are looking for. Of course, you can always go to our Contact Us page to get a map and contact information to ask directly for help. In any case, we look forward to assisting you.
And don’t forget! All these services are designed for both individual and fleet customers! So, if you are a business with fleet vehicles, please drop by so we can set you up with a fleet account. To learn more about this, please check out our Fleet Lube & Maintenance Services.
Let’s Talk Safety
Lube Stop is 100% committed to ensuring your vehicle’s engine and the components it powers are all operating as they should. We are also 100% committed to ensuring that your safety is taken care of, too. This means checking that all the parts of your vehicle that keep you safe, are working as well. These include the following list of items.
- A/C and Heating System
- Air Bags
- Electrical Charging System
- Exhaust System
- Ignition & Timing System
- Spare Tires
- Turn Signals
- Vehicle Horn
- Windshield Wipers
- Any Leaks, Squeaks, Rattles or Odours
These safety checks are included in Lube Stop’s Precision Based Recommendations process. Specifically, they are included in their 37+ Point Inspections that are performed each time you drive into one of our shops. There are 15 or more safety checks performed during this standard practice. When an issue is detected, Lube Stop technicians bring those matters to your attention and make suggestions as to how to address them. It is important to have a fully functioning car, truck, or SUV, but it’s also important to have a safe drive for you and your family. So, when you come to Lube Stop, rest assured that we will be checking for both your vehicle’s health and your own personal safety while driving.
Why Do I Need an Ignition Timing & Idling Checks service?
The Ignition Timing & Idling Checks service is the inspection of your vehicle’s ignition system. A well-maintained ignition system helps your vehicle engine deliver lots of benefits. For example, it helps the engine perform better, prevents combustion inside the system, and reduces unnecessary ignition emissions.
We do these checks so that our customers can avoid problems with the ignition timing in their car, truck, or SUV. The ignition system is an important maintenance item responsible for ensuring your engine works well and does not breakdown. This is because when the timing is set correctly it does its job better. For example, it protects the ignition system from sparks that can cause major damage to the exhaust system and engine.
So, it is fair to conclude that a faulty ignition system is NOT something you want to ignore.
That’s why we check the ignition timing every visit. We need to make sure that it is set properly and functioning as it should. We understand that it costs a little in the short run to have the ignition timing maintained, but it saves a lot in the long run.
How Often Do I Need It?
The ignition system should be checked each time you have service with Lube Stop. And, of course, we should check it anytime you have observed issues. Your owner’s manual will also advise you to do it at various intervals. Please check your manual.
Also, lean on us at Lube Stop for advice. We use a system of processes called Precision Based Recommendations to help investigate a vehicle’s overall condition. This system of inspection and trouble shooting helps us get a clearer picture of your car, truck, or SUV as it stands, today. That is because it removes the guess work. Learn more about this system below.
Can Lube Stop do the Trouble Shooting?
Lube Stop employs the best technicians and mechanics in this service area. These technicians are more than qualified to help inspect the issues and make recommendations to problem solve.
Which Towns and Cities are in our Fast Lube Service area?
Our lube shop & tire service area includes the following towns and cities listed below.
- Muenster, Saskatchewan
- Burr, Saskatchewan
- Saint Gregor, Saskatchewan
- Lake Lenore, Saskatchewan
- Bruno, Saskatchewan
- Pilger, Saskatchewan
- Lanigan, Saskatchewan
- Plunkett, Saskatchewan
- Watson, Saskatchewan
- Meacham, Saskatchewan
- Viscount, Saskatchewan
- Naicam, Saskatchewan
- Saint Brieux, Saskatchewan
- Cudworth, Saskatchewan
- Reynaud, Saskatchewan
- Jansen, Saskatchewan
- Colonsay, Saskatchewan
- Quill Lake, Saskatchewan
- Watrous, Saskatchewan
Context for these Services
Your vehicle uses an internal combustion engine. This engine uses the combustion of fuel to power almost everything. This is done when fuel alongside an air oxidizer and spark plugs creates a working fluid flow circuit inside a combustion chamber.
In your internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is applied typically to pistons, turbine blades, rotors and nozzles. This force moves the component over a distance, transforming chemical energy into useful work.
Typically, your combustion engine is fed with fossil fuels like natural gas or petroleum products such as gasoline, diesel fuel or fuel oil. Your engine is the hub for many things, including those listed below.
- combustion chamber
- cylinder head
- set of spark plugs
- rocker arms
- fuel injectors
- connecting rods
- engine block
- timing system
- timing chain
All these work in unison to power all the other systems within your vehicle. Without a fully functioning engine, everything else suffers. So, let us at Lube Stop keep your engine functioning and everything else that relies on it.
Maintaining your Vehicle
To do this, you must TAKE CARE of your vehicle. That means changing the oil regularly. It also means changing your filters regularly. And, it means changing your fluids, lubricants, coolants and greases. These maintenance parts don’t remain the same. They get dirty, dusty, polluted, corroded and worn as you drive your vehicle from day to day. So, if you want to extend the life of your car, truck or SUV, then you must maintain it and take care of it.
So, drop by our lube shops and get your oil changed, your filters changed, your fluids checked or flushed, your belts replaced … and so on. We’re standing by!